A FEW GENERAL RULES

If the vehicle is not equipped with an ABC, avoid heavy braking when learning in Automatic Driving Lessons Coventry. Otherwise, the braking distance may end under a slope. On a road with pits and bumps, use level areas for braking. Otherwise, there is a resonance effect. The wheel jumps like a ball, and most of it is in the air, which does not contribute to braking.

In general, you must clearly understand: you do not need to break on bumps - it is more effective to break before an obstacle and immediately after you pass it. Otherwise, damage to the suspension and brakes is very likely. These units are already loaded with inertial force and braking force, and in addition, they also receive a blow against an obstacle.

There are many different methods of braking. However, for daily driving, it is enough to know and use the simplest and most reliable methods.

Intense braking

This method is the most common. The principle is very simple: the brake pedal is pressed once and all the way. This occurs on the verge of tire adhesion; as the vehicle's highest deceleration point is very close to skid.

This method is best practised on a straight stretch of road that is not heavily trafficked. Accelerate the vehicle to 60 km / h and depress the brake pedal firmly. As soon as you feel that the wheels

have started to slip, release the brakes slightly until the grip of the wheels is restored to the road. As soon as the car stops sliding, depress the brake pedal firmly again until it comes to a complete stop.

Combined braking

This is one of the most effective braking methods. And its essence lies in the fact that not only the braking system of the car is involved in the process, but also the engine - through the inclusion of low gears. In this case, the car loses speed faster, and the inertia of rotation of the knots in low gears does not allow blocking the driving wheels and sliding them.

This method is very easy to work out. On a section of road that allows you to accelerate to 80 km / h, start braking when driving in 4th gear. Then, without releasing the brakes, quickly switch to 3rd gear, extinguish the speed, then turn on - 2nd, then - 1st gear until the car comes to a complete stop.

While exercising, you will be convinced of the high efficiency of this method, which is recommended for use in emergency braking.

Step braking

It is easy to digest and consists of multi-stage use of the brake pedal. For training, you need to accelerate the car to 30 - 35 km / h and start braking with clearly defined segments. It is desirable to be uniform in time, but different in the effort of the foot on the pedal. The first force should be the most intense; it helps to feel the brake pedal.

The second push, the third, and so on up to a stop, should provide smooth braking without jerking and pecking of the car with the nose. In Driving schools Birmingham this moment is very important, because it is in the final stage, when you release the brake pedal before stopping; you take off the forward swoop of the car.

The task is considered completed if the smooth deceleration is maintained at each stage from the beginning of deceleration to a complete stop. This method is necessary for those drivers who got behind the wheel of a car for the first time. They need to learn how to feel the pedal and brake actuator for comfortable and safe braking.

How car driving is a lifelong skill?

What is the fear of driving and how to get rid of it?

Exams in the traffic police on the first attempt are not passed by all

See all posts from materialz